Olympia Chimney Chimney Cap & Crown Nationwide

Olympia Chimney Chimney Cap & Crown in Paterson: What to Know First

Olympia Chimney cap and crown work in Paterson typically runs $285 to $1,400 depending on whether we’re replacing a rusted cap, rebuilding a cracked crown, or fitting a custom multi-flue setup. Most jobs are completed in a single visit, and you get a written price before we touch anything. We’re an independent Olympia Chimney service provider, which means we install their caps and know their product lines well, but we’re not a factory warranty shop.

Call (862) 356-5229

This page is for Paterson homeowners who own an Olympia Chimney cap, crown, or liner system and want straight answers about repair costs, failure patterns, and what’s worth fixing versus replacing. If you’ve got a cap that’s rusted through or a crown that’s spalling onto the roof, call (862) 356-5229. Corrine Halstead or a member of our team will walk you through what to look for before we ever schedule a visit.

Key Takeaways:

• Olympia Chimney caps and crowns have specific failure modes we see repeatedly in Paterson: galvanized cap rust-out, crown surface spalling, and improper mortar use on crown repairs.
• The price on this page is the price range we quote: no “call for a quote” games, no hidden line items.
• Every Olympia Chimney job includes a camera inspection, written scope, and photo record under Haven Standard Clause 4.
• We’re not affiliated with Olympia Chimney. We’re an independent shop that stocks and installs their parts alongside quality aftermarket options.

How Olympia Chimney Products Fail - and How We Fix Them

Olympia Chimney makes solid, affordable products. But in Paterson’s freeze-thaw cycles and humid summers, even good caps and crowns eventually fail. Here are the five failure patterns we see most on Olympia Chimney systems in this area:

• Olympia galvanized steel caps rusting at the weld points. The standard Olympia cap is built from galvanized steel, and the welded seams are the first to go. Water sits in the seam, the zinc coating wears off, and rust pinholes form within 4 to 7 years. We replace these with either OEM Olympia caps or, more often, a stainless steel cap from DuraFlex or Copperfield that outlasts the galvanized original by a decade or more.
• Olympia crown surfaces spalling in freeze-thaw cycles. Crowns installed with standard mortar mix absorb water. In Paterson winters, that water freezes, expands, and pops off the surface layer. We see this constantly on older Olympia installations, especially on row houses near the Great Falls Historic District where the original masonry is decades old. Our fix is a full crown rebuild with a water-resistant mix, not a patch job.
• Multi-flue Olympia cap bases cracking at the flue tile junction. The multi-flue caps Olympia sells for wider chimneys rely on a base plate that sits on top of the flue tiles. If the tiles were never leveled, the base plate flexes and hairline cracks form within a few seasons. We can fabricate a custom-fit base or install an Olympic multi-flue cap with a reinforced mounting channel that distributes the load properly.
• Improper mortar on Olympia crown repairs causing early re-failure. We see crowns that were “repaired” with standard Type S mortar or, worse, pre-mixed vinyl patch from a bucket. These fail in under a year because they don’t resist water intrusion. We use a cementitious crown-specific mix that bonds to the existing crown and sheds water rather than absorbing it.
• Missing or undersized caps on Olympia chimney liners. Some Olympia liner installations never got a cap at all, or the installer put a cap that didn’t match the liner diameter. That allows rain directly into the flue, which degrades the liner and causes rust streaks on the firebox walls. We measure the liner I.D. with digital calipers before ordering any replacement cap, because a 6″ cap on a 5.5″ liner doesn’t seal, and a 7″ cap on a 6″ liner leaves a gap driven by Paterson’s wind patterns.

Our Olympia Chimney Chimney Cap & Crown Process

We’ve got a set process for Olympia Chimney cap and crown work. Here’s what happens from the first call to the final photo:

1. 1
   Call and talk to a person. You call (862) 356-5229. We answer. You describe what you’re seeing: rust flakes on the roof, water in the firebox, chunks of crown material in the gutter. We’ll tell you what that usually means.
2. 2
   Camera inspection first, always. Corrine’s rule: “Camera first, quote second, work third - in that order, every time.” Before we recommend any cap or crown work, we run a camera down the flue and look at the crown from the roof. We don’t quote blind.
3. 3
   The parts decision: OEM Olympia vs. quality aftermarket. If your Olympia cap is still under its warranty period, we recommend an OEM replacement. If it’s out of warranty, we’ll show you the price difference between an Olympia cap and a comparable DuraFlex or Copperfield cap. You choose with full pricing in front of you.
4. 4
   The repair or installation. We remove the old cap or crown material, prep the surface properly, and install the new components. For crown work, that means building a form and pouring a proper crown mix that slopes away from the flue tiles. No vinyl patch, no shortcuts.
5. 5
   Test and document. After the job, we run water over the crown and cap with a hose to confirm drainage, snap photos of the finished work, and hand you a written record of everything that was done, including a written warranty. That’s Haven Standard Clause 4, and we’ve done it this way since 2009.
6. 6
   Cleanup and follow-up. We clean up every scrap of old crown material and cap hardware from your roof and gutter. You get a text with name of the tech who did the work. If anything’s not right within 365 days, we make it right. That’s the Done Right Promise.

Before

After

What Olympia Chimney Chimney Cap & Crown Costs in Paterson

Here’s the honest price range for the Olympia Chimney work we do in Paterson:

• Standard Olympia chimney cap replacement: $285 to $495, depending on flue size and whether we’re installing OEM or a stainless aftermarket cap.
• Multi-flue Olympia cap replacement: $525 to $875 for typical two- to three-flue homes, more if we need a custom-fabricated base plate.
• Crown repair (partial): $350 to $600 for localized spalling repair with proper crown mix and sealing.
• Full crown rebuild: $850 to $1,400 for removal of the old crown, form work, new mix, and cure time. This is common on older Paterson homes with original clay flue tiles still in place.

What moves the price: access (steep roof pitches on some of the older three-story homes near the Great Falls add labor), the condition of the flue tiles (if they’re cracked, that’s a separate repair we’ll show you on camera before adding it to the scope), and whether you’re going OEM or aftermarket. You get a written price, in dollars, before we start. Call (862) 356-5229 for a free estimate, no pressure and no obligation.

Why Paterson Homeowners Call Level Two Chimney Paterson for Olympia Chimney Work

We’ve inspected and cleaned more than 38,000 chimneys since 2009, every single one with a written price before work started and a documented record when it was done. That’s not a marketing line - it’s the way we’ve operated since day one under the Haven Standard. When we quote an Olympia cap or crown job, you get the price, the scope, and the warranty in writing before we start. Not after the tech is already in your home. That’s Haven Standard Clause 1.

Our techs are background-checked, uniformed, and trained on Olympia Chimney product lines specifically. We know which caps fit which liners, which crowns fail first, and when it’s smarter to go with a DuraFlex, HeatShield, or Gelco product instead of OEM. That multi-brand knowledge matters because we’re not married to one manufacturer. We’re married to the right fix for your flue. And if you have a written estimate from another company, bring it in. We’ll give you a free second opinion.

FAQs